| Customization: | Available |
|---|---|
| Type: | Diamond |
| Classification of Diamond: | Artificial |
|
Still deciding? Get samples of US$ 0.09/Carat
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Monocrystalline Metal Bonded Reshaped Mesh Diamond Powder Grade HID R
Synthetic diamond, man-made diamond that is usually produced by subjecting graphite to very high temperatures and pressures. Synthetic diamond resembles natural diamond in most fundamental properties, retaining the extreme hardness, broad transparency (when pure), high thermal conductivity, and high electrical resistivity for which diamond is highly prized.
Monocrystalline diamond powder is relatively inexpensive to produce and therefore widely used for grinding, lapping and polishing applications. Industrial diamonds are used for the cutting and grinding of very hard materials, for optical devices, such as lasers, for heat dissipation, and for diamond coatings to produce enhanced wear resistance.
- Monocrystalline Metal Bonded Reshaped Mesh Diamond Powder Grade HID R
Description: Using high-quality diamond as the raw material, the diamond raw material is repeatedly collided, rubbed, and smashed by high-pressure airflow. The broken crystal can be shaped into regular, spherical, and diamond-shaped particles, and then purified, washed, classified, and dried. After that, the inspection and storage; the cleanliness of the product surface is higher than the relevant national standards.
Characteristics: regular crystals with high aspect ratio, nearly spherical particles; concentrated particle size distribution; highly consistent particle shape; extremely high purity, and the impurity content can be controlled below 20PPM.
Application: It is suitable for metal bond abrasive tools, ceramic bond abrasive tools, resin bond abrasive tools and electroplated products. It is a good general-purpose product for processing cemented carbide, glass, ceramics, stone and other non-metallic products.
- Monocrystalline Metal Bonded Mesh Diamond Powder Premium Grade SCDA+
Description: On the basis of SCDA product, we use special technology to do the shaping by direction-oriented crushing, corner rounding and roughing treatment to completely remove the irregular flakes and rod-like particles, which guarantees each particle crystal blocky with rough surfaces but without sharp edges or smooth crystal faces.
Characteristics: Very tight particle size distribution; extremely regular and blocky shape; very high consistent of particle shape; very high surface cleanness
- Monocrystalline Metal Bonded Mesh Diamond Powder Standard Grade SCDA
Description: Selecting monocrystalline diamond as the raw material, the diamond mesh is produced through crushing, purifying and grading. This superhard abrasives have irregular shape and rough surface, which is sharp and wear resistant. Perfect raw material control system ensures the stability of the products; Advanced post treatment technology enables the super-low magnetic property; Various normal and round mesh products available according to customer's requirement.
Characteristics: Tight particle size distribution; irregular and blocky shape; high consistent of particle shape; high surface cleanness.
Application: It is suitable for metal bonded, ceramic bonded abrasives and electroplated products, and processing non-metallic products such as cemented carbide, glass, ceramics, stone, etc. As a good versatility product, it can be used in many applications that require less strict tolerance.
- Monocrystalline Resin Bonded Green Mesh Diamond Powder Economic Grade RVD
Description:Higher toughness, high purity, processed by special milling and shaping techniques; blocky shape.
Application: Resin bonded and vitrified bonded products and electroplated products; Machining carbide, glass, ceramic, stone and other non-metallic materials.
Characteristics: Standard particle size distribution; irregular crystal shape; more friable than metal bond diamond; high brittleness and high grinding efficiency.
| Size | 70/80 | 80/100 | 100/120 | 120/140 | 140/170 | 170/200 | 200/230 | 230/270 | 270/325 | 325/400 | 400/500 | 500/600 |
| Grade | D213 | D181 | D151 | D126 | D107 | D91 | D76 | D64 | D54 | D46 | D35 | D25 |
| SCDA | √ | √ | √ | √ | √ | √ | √ | √ | √ | √ | √ | √ |
| RVD | √ | √ | √ | √ | √ | √ | √ | √ | √ | √ | √ | √ |
| HID-R | √ | √ | √ | √ | √ | √ | √ | √ | √ | √ | √ | √ |
| HARMONY | U.S.A | JAPAN | RUSSIA | |||||||||||
| GB/T6406-1995 | ISO | FEPA | ANIS B74.16-1971 | JIS4130-1988 | Theoretlcal | 9206-80 | ||||||||
| Baslc Size | ||||||||||||||
| Grain No | Grain Size | Grain No 1 | Grain No 2 | Grain Size | Grain No | Grain Size | Grain No | Grain Size | Grain No | Grain Size | Inch | Mlllmeter | Grain No | Grain Size |
| 40/50 | 425/300 | 427 | 40/50 | 425/300 | B/427 | 355/300 | 40/50 | 425/300 | 40/50 | 425/300 | 0.015 | 0.378 | 500/400 | 500/400 |
| 50/60 | 300/250 | 301 | 50/60 | 300/250 | B/301 | 300/250 | 50/60 | 300/250 | 50/60 | 300/250 | 0.011 | 0.288 | 400/315 | 400/315 |
| 60/80 | 250/180 | 252 | 60/80 | 250/180 | B/252 | 250/180 | 60/80 | 250/180 | 60/80 | 250/180 | 0.009 | 0.226 | 250/200 | 250/200 |
| 80/100 | 180/150 | 181 | 80/100 | 180/150 | B/181 | 180/150 | 80/100 | 180/150 | 80/100 | 180/150 | 0.0069 | 0.174 | 200/160 | 200/160 |
| 100/120 | 150/125 | 151 | 100/120 | 150/125 | B/151 | 150/125 | 100/120 | 150/125 | 100/120 | 150/125 | 0.0058 | 0.148 | 160/125 | 160/125 |
| 120/140 | 125/106 | 126 | 120/140 | 125/106 | B/126 | 125/106 | 120/140 | 125/106 | 120/140 | 125/106 | 0.0048 | 0.123 | 125/100 | 125/100 |
| 140/170 | 106/90 | 107 | 140/170 | 106/90 | B/107 | 106/90 | 140/170 | 106/90 | 140/170 | 106/90 | 0.0041 | 0.103 | 100/80 | 100/80 |
| 170/200 | 90/75 | 91 | 170/200 | 90/75 | B/91 | 90/75 | 170/200 | 90/75 | 170/200 | 90/75 | 0.0034 | 0.086 | 80/63 | 80/63 |
| 200/230 | 75/63 | 76 | 200/230 | 75/63 | B/76 | 75/63 | 200/230 | 75/63 | 200/230 | 75/63 | 0.003 | 0.075 | 63/50 | 63/50 |
| 230/270 | 63/53 | 64 | 230/270 | 63/53 | B/64 | 63/53 | 230/270 | 63/53 | 230/270 | 63/53 | 0.0026 | 0.066 | 50/40 | 50/40 |
| 270/325 | 53/45 | 54 | 270/325 | 53/45 | B/54 | 53/45 | 270/325 | 53/45 | 270/325 | 53/45 | 0.0022 | 0.057 | - | - |
| 325/400 | 45/38 | 46 | 325/400 | 45/38 | B/46 | 45/38 | 325/400 | 45/38 | 325/400 | 45/38 | 0.0019 | 0.048 | - | - |
With our raw materials all from strictly quality-controlled suppliers, we pay more attention to all kinds of product standards to meet various application requirements from customers, such as: basic multiple edge particle feature, above international standard, basic particle contents at upper and lower limits, oversize control, low magnetic, hight surface purify.
- Stone processing tools, ceramic processing tools, diamond grinding wheels, etc.
- Ceramic bond abrasive tools, hard alloy processing, stone processing, electroplating products, etc.
- Resin abrasive tools, etc.
){kind=link}